mailbox：tyler@hzdtsk.com
PRODUCTS CENTER
Papua New Guinea High rigid gantry machining center
Workbench size: 3000 × 1600mm
Spindle speed: 6000r/min
CNC system: FANUC 0i mf plus of Japan
Category:
Product Description
Specifications(Unit in brackets)
|
Travel |
Left and right X axis - 3000 (mm), front and rear Y axis - 1800 (mm), upper and lower Z axis - 1000 (mm); |
workbench |
Size: - 3000x1600 (mm), maximum bearing: - 10000 (kg), distance from workbench to spindle end face: - 200 to 1200 (mm); |
|
Feed drive |
G01 feed speed - 10 (m/min), G00 fast moving speed - 12 (m/min); |
spindle |
Spindle taper BT50, spindle speed 6000 (rpm), spindle motor 15/18.5 (kw), |
|
Triaxial |
Three axis motor 3.0, 3.0, 3.0 (kw), |
accuracy |
Positioning accuracy 0.02, repeated positioning accuracy 0.015 |
|
Tool magazine
|
Robot tool magazine 24 (pcs), tool change time 1.8 (s), maximum tool length 300 (mm), maximum tool diameter 78 (mm), maximum tool diameter 120 (mm), maximum tool weight 8 (kg); |
other |
product details
 |
GL3018 high rigid gantry machining center
|
The preferred product for upgrading of medium-sized Riga is "strong debut"
 |
1. The rigidity of the whole machine exceeds 2 times of vertical plus! 〇 The machine tool adopts a door structure, and the double columns and |
|
Integrated beam and column composite Optimize the original six pieces of the gantry into five pieces to avoid assembly
|
 |
 |
The machining accuracy of the fully supported worktable is more stable! 〇 The worktable runs 100% completely on the supporting surface, |
|
The best feeding system! Axis X and Y adopt linear heavy-duty roller guide rail with low friction coefficient, which improves the positioning accuracy and dynamic accuracy of the drive; |
|
Superior performance lies in the design of each fuselage component
Each component has been repeatedly designed and calculated to achieve excellent structural rigidity, and has been manufactured and verified for many times to finally obtain the requirements of the processor for rigidity and accuracy, and meet the vast majority of user use scenarios.
 |
High precision moving parts ensure high machining accuracy
All lead screws and wire rails are made of Taiwan Shangyin/Yintai or above brands, and fake or low-grade functional parts are rejected. The three-axis lead screw bearings are made of Japanese NSK high-precision bearings
The dustproof treatment prevents the iron filings from entering. Only high-quality functional parts can achieve good quality.
|
Details determine success or failure, practical, reliable and beautiful
Every detail has been carefully designed by technicians to meet the needs of use and to be beautiful. The assembly personnel will strive to make every detail perfect
 |
Specifications(Unit in brackets)
|
Travel |
Left and right X axis - 3000 (mm), front and rear Y axis - 1800 (mm), upper and lower Z axis - 1000 (mm); |
workbench |
Size: - 3000x1600 (mm), maximum bearing: - 10000 (kg), distance from workbench to spindle end face: - 200 to 1200 (mm); |
|
Feed drive
|
G01 feed speed - 10 (m/min), G00 fast moving speed - 12 (m/min); |
spindle |
Spindle taper BT50, spindle speed 6000 (rpm), spindle motor 15/18.5 (kw), |
|
Triaxial
|
Three axis motor 3.0, 3.0, 3.0 (kw) |
accuracy
|
Positioning accuracy 0.02, repeated positioning accuracy 0.015 |
|
Tool magazine
|
Robot tool magazine 24 (pcs), tool change time 1.8 (s), maximum tool length 300 (mm), maximum tool diameter 78 (mm), maximum tool diameter 120 (mm), maximum tool weight 8 (kg); |
other
|
product details
|
|
GL3018 high rigid gantry machining center 1. The rigidity of the whole machine exceeds the vertical acceleration! |
The preferred product for upgrading of medium-sized Riga is "strong debut"
|
|
The rigidity of the whole machine exceeds 2 times of vertical plus! 〇The machine tool adopts a door type structure. The door back structure of double columns and cross beams is carefully designed. The rigidity of the whole machine is more stable, with high rigidity, heavy cutting, high speed and high precision; |
|
|
Integrated beam and column composite The original six parts of the gantry are optimized into five parts to avoid assembly errors and improve the stability of the whole machine. |
|
|
The machining accuracy of the fully supported worktable is more stable! 〇The worktable runs 100% completely on the supporting surface, Ensure the uniform friction coefficient during the movement of the workbench, Achieve high stability, long service life and heavy load of the machine tool. The worktable passes through the middle of the column, and its width and Y-direction stroke increase by 25%, making the space utilization in Y-direction more effective, which is conducive to the processing of round and square parts such as molds and boxes. Users can choose the auxiliary workbench design to facilitate users' clamping and use, and improve the rigidity and accuracy of gantry machine tools |
|
|
|
The best feeding system! Axis X and Y adopt linear heavy-duty roller guide rail with low friction coefficient, which improves the positioning accuracy and dynamic accuracy of the drive; |
|
Superior performance lies in the design of each fuselage component
Each component has been repeatedly designed and calculated to achieve excellent structural rigidity, and has been manufactured and verified for many times to finally obtain the requirements of the processor for rigidity and accuracy, and meet the vast majority of user use scenarios.
|
High precision moving parts ensure high machining accuracy
All lead screws and wire rails are made of Taiwan Shangyin/Yintai or above brands, and fake or low-grade functional parts are rejected. The three-axis lead screw bearings are made of Japanese NSK high-precision bearings
The dustproof treatment prevents the iron filings from entering. Only high-quality functional parts can achieve good quality.
|
Details determine success or failure, practical, reliable and beautiful
Every detail has been carefully designed by technicians to meet the needs of use and to be beautiful. The assembly personnel will strive to make every detail perfect
Datan CNC's main products or services: high-speed and high-precision machining center, five-axis Simultaneously controllable machining center, functional complex machining center, flexible manufacturing units, Hardware, software and service providers for R&D and production of high-end and mid-to-high-end CNC machine tools.
Contact Details
E-mail：tyler@hzdtsk.com
Address: Lin Pu high tech Development zone of xiaoshan District of Hangzhou city in Zhejiang province China
